GENERAL FAQ'S
StandIt™ is rated to take a load of up to 500kg per device.
StandIt™ is rated to take a load of up to 500kg per device.
Prior to deciding on a location, ensure you have a rated, level surface to set up on. Consult a registered engineer for advice on the floor capacity and the best position in the room for the device.
Prior to deciding on a location, ensure you have a rated, level surface to set up on. Consult a registered engineer for advice on the floor capacity and the best position in the room for the device.
No, the device should not be set up on soft ground as it may sink and cause instability.
No, the device should not be set up on soft ground as it may sink and cause instability.
No, the safety pole is a proprietary item, to maintain the warranty conditions this must be replaced with the designated safety pole provided by StandIt™.
No, the safety pole is a proprietary item, to maintain the warranty conditions this must be replaced with the designated safety pole provided by StandIt™.
StandIt™ can save approximately 40% of the floor area in terms of width. Length will depend on the size of the panel being stored.
StandIt™ can save approximately 40% of the floor area in terms of width. Length will depend on the size of the panel being stored.
The ground clearance at the narrowest point of the StandIt™ base is 70mm, allowing for tolerance in low-level flooding situations.
The ground clearance at the narrowest point of the StandIt™ base is 70mm, allowing for tolerance in low-level flooding situations.
WARRANTY FAQS
Yes, all StandIt™ devices come with a full 24-month warranty for parts and workmanship.
Yes, all StandIt™ devices come with a full 24-month warranty for parts and workmanship.
No, any external damage caused by means outside normal use is not covered under the standard warranty.
No, any external damage caused by means outside normal use is not covered under the standard warranty.
